loading... Loading...

Registered: 14-08-2018
Messages: 208
Rating: 2
11-03-2019 09:13
(permalink)
https://www.syncios.com/images/icon/roboto.jpg
What is USB Debugging Mode?
If you use an Android phone and you’ve searched forums for solutions to problems, you’ve probably heard the term “USB Debugging” every once in a while. You may even have seen it while looking through your phone’s settings. It sounds like a high-tech option, but it really isn’t; it’s quite simple and useful.

USB Debugging Mode is one thing that you cannot skip to know if you are an Android user. The primary function of this mode is to facilitate a connection between an Android device and a computer with Android SDK (Software Development Kit). So it can be enabled in Android after connecting the device directly to a computer via USB.

https://www.syncios.com/images/icon/roboto.jpg
Why I need to enable USB Debugging Mode?
USB Debugging grants you a level of access to your device. This level of access is important when you need system-level clearance, such as when coding a new app. It also gives you much more freedom of control over your device. For example, with Android SDK, you gain direct access to your phone through your computer and that allows you to do things or run terminal commands with ADB. These terminal commands can help you restore a bricked phone. You are also able to use some third-party tools to better manage your phone (for example, Syncios Mobile Transfer [syncios.com]). So this mode is a useful tool for any adventurous Android owner.

Now, please follow these steps to debug your Samsung Galaxy S10.

Step 1: Turn on your Samsung Galaxy S10. From a Home screen, swipe up or down from the center of the display to access the apps screen.

Step 2: Open Settings and find "Developer Options". If presented, enter the current PIN, password or pattern and skip to step 6. If not available, follow step 3.

Step 3: Under Settings option, select About phone, then choose Software Information.

Step 4: Scroll down the screen and tap Build number several times until you see a pop-up message that says "Developer mode has been enabled".

https://www.syncios.com/images/article/samsung-note-9-usb-debugging.jpg


Step 5: Tap on Back button to return and you will see the Developer options menu under Settings.

Step 6: Click on Developer options. Slide the "Developer Options" button to "On".

Step 7: Then scroll down the screen and turn on "USB debugging". You will see a messages "Allow USB Debugging", click "OK".

https://www.syncios.com/images/article/samsung-note-9-developer-option.jpg

Registered: 08-02-2019
Messages: 25
Rating: 0
10-08-2020 06:48
(permalink)
There are few ways through which you can enable USB debugging on Samsung Galaxy S10 phone.
Open Settings > About Phone (or About
Tablet 
for tablet users) > Build Number.
Tap on Build Number for 7 Times (applicable
for Android 4.2 and higher OS version)
When you are done, you’ll see the message “You are now a developer!
Now go back to Setting you will see the Developer
Options
 – tap on it.
You will see the option of USB Debugging – just check
mark the box
.
A confirmation dialogue box will appear asking
the confirmation – simply tap on OK.
Apart from this, you can also use OTG cable and USB adapter to remotely enable USB debugging.
Even you can use ADB command to enable USB debugging on Samsung/Android phone. No these both methods are helpful to enable USB debugging on Android with black screen [androiddata-recovery.com]. It means that if your Samsung or other Android devices screen becomes black or dead then remotely you can enable USB debugging easily.
new message - new message
 

Quick reply form

Reply form preview

You need to register or login to post to this thread